Having selectable brightness levels is great if you're chasing power savings or if you need to brighten an area. Hands down the most versatile light I have installed. - Peter V. (Verified Buyer)
Emergency Oyster Light With Sensor
The Chamaeleon Deco 2 Emergency from enLighten is a versatile oyster or bulkhead light that reduces wasted electricity in common areas. You can set your preferred brightness, colour temperature, motion sensing, and daylight level response to suit your site. Its features include:
Emergency - Battery Backup Light - replaceable lithium battery provides over 90 minutes of backup power. The 'maintained' light fitting carries a D40 emergency classification. Don't need backup? See our regular Deco 2 Oyster Light With Sensor.
Tri Wattage - Three Brightness Options. Choose between 9W, 12W, or 17W LED brightness levels to suit your particular requirements.
Dual Colour - Selectable Colour Temperature. Each emergency oyster light fitting includes a colour temperature selector. Choose between warm white (3000K) or neutral/cool white (4000K).
Sensor - Configurable Daylight & Motion Sensor. Each emergency oyster light includes a daylight sensor and motion sensor. You can configure these in various ways to reduce your energy consumption whilst maximising safety and accessibility.
Chamaeleon Deco 2 emergency oyster light with sensor - looks great & saves energy.
Guaranteed Long Lifetime. The Chamaeleon Deco 2 emergency is designed to operate for 60,000 hours and includes a five-year warranty. The included lithium battery is warrantied for two years.
Weatherproof & Impact Ratings. The light fitting carries an IP44 water-resistance rating (suitable for use in toilets, bathrooms and under the eaves). It also has an IK10 impact resistance making it ideal for public spaces and shared areas in strata buildings.
Chamaeleon Deco 2 Emergency Oyster Light Features
How This Emergency Oyster Light Saves Energy
The Chamaeleon Deco 2 emergency model has a range of settings that you can adjust at installation or later on. The 'dip switches' that control these settings are accessible under the diffuser (twist off to remove).
In addition to colour temperature and wattage, here are some of the other adjustment options:
- Detection Range - this can be reduced to 50% if you find the sensor is too easily triggered.
- Daylight Sensor - if activated, the light will remain off when there is sufficient natural light. You can even adjust the light level at which the light will turn off (25 lux, 75 lux or 150 lux).
- Hold Time - how long the light remains on after motion is no longer detected (5 seconds, or 1, 5, or 10 minutes).
- Standby Time - how long the light stays on at its standby level before turning off (0 seconds, 10 minutes, 30 minutes, Infinity).
- Standby Level - the level of light output when in standby mode (10% or 25%).
How the Deco 2 emergency sensor light works.
Specifications - Deco 2 Emergency Oyster Light
|Fitting Type||Ceiling or wall-mounted complete oyster light fitting with emergency battery backup
|Power Consumption||17W (reduceable to 12W or 9W with internal switch)
|Standby Power||3W at 10% brightness|
|Voltage||220 - 240V|
|Battery Backup||3.2V 3,000mAh Lithium (LiFePO4)|
|Emergency Classification||D40, 90 minutes battery backup duration|
|Colour Temperature||Warm White 3000K or Neutral White 4000K (selectable by internal switch)|
|Light Output||1,500 Lumens (1,000 or 700 lumens when power levels are reduced)|
|Sensor Type||Microwave motion sensor and daylight sensor|
|Dimming||Sensor-based step dimming (full, standby, or off modes - details in the installation guide)|
|Ratings||IP44 (water-resistant) and IK10 (highest level of impact resistance)|
|Material||Polycarbonate body and cover (diffuser)|
|Dimensions||335mm (diameter) by 63mm (depth)|
|Installation||Installation by an electrician. 3 wire terminal block for electrical connection inside unit (see installation instructions below for details).|
|Product Identifiers||D2-CHAM-E, enLighten Chamaeleon or Chameleon Deco 2 Emergency|
|Further Documentation||Datasheet (PDF), Installation Guide (PDF), IES file for lighting designers.|
|Warranty||5 Years (fitting), 2 Years (Battery)|
Frequently Asked Questions
Is a replacement battery available? What does it cost?
Yes - please contact us if you require a replacement battery for this product in the future. The replacement lithium battery costs around $50, but we have not needed to replace any yet!