Unlock Extra LED High Bay Features
This remote lets you control various functions of the Ledvance Valuebay PRO LED High Bay Light. All high bays must have the optional motion sensors fitted, as they act as receivers for the remote signal.
You can control all sorts of high bay lighting functions, including:
- Activate or deactivate the microwave sensor.
- Manually adjust brightness levels from 10% to 100%.
- Adjust daylight sensitivity from 5 to 150 lux (or leave it disabled). This is also known as ‘daylight harvesting.’
- Adjust the 'hold time' from 5 seconds to 30 minutes. Hold time is how long the light stays on after no movement is detected.
- Set the 'standby time' to a value between 0 seconds and infinity. Standby time is how long the light stays on after the hold time is over.
- Adjust the standby dim level. This controls the light's standby-state brightness, if used, from 10% to 50%.
- Tune the sensor's sensitivity or detection area from 25% to 100%.
- And more!
See the complete PDF user guide below for the exact settings and options.
Specifications - Ledvance Valuebay Pro Remote Control
| Compatibility | Ledvance Valuebay PRO Tri Colour Highbay (70-120W and 120-200W) |
| Product Identifiers | Ledvance Valuebay PRO Remote Control for Microwave Sensor; MSRC (part number); 4099854774904 (barcode) |
| Further Details | User Guide (PDF) |
Frequently Asked Questions
How high can I install the lights and still use the remote?
The remote control has a 5m, 10m, and 15m toggle to optimise signal transmission for your ceiling height. You typically stand below each light and point the remote up to program it. This means you can install the lights up to 15m high.