Philips Tri Colour LED Downlight 7.5W Dimmable
Dimmable LED Downlight for 90mm Ceiling Cut-Outs
This Philips LED downlight is a perfect solution for replacing existing or installing new dimmable LED downlights. It has the following key features:
Energy Efficient - It consumes just 7.5W of power, but puts out more light than an old fashioned halogen downlight that uses 50W.
Dimmable LED Downlight - Works well on existing or new LED dimmers.
Robust & Versalite - This dimmable led downlight carries an IP54, IC-4 and IK03 rating. This means it is splash-proof, can be covered with ceiling insulation, and is impact resistant.
Selectable Colour Temperature - A tri-colour switch on the back of the downlight allows you to choose your preferred colour temperature (see graphic below).
Easy Installation - Comes pre-wired with a power lead and 2-pin power plug.
The Philips dimmable LED downlight includes three colour temperature options built-in (3000K warm white, 4000K neutral white, or 6500K daylight).
Dimmable LED Downlight Spacing Guide
The graphic below provides an installation guide for new downlight installations. Notice that the light spread at floor level is 5.7m, which is about 2.4 times the ceiling height.
To calculate the light spread at floor level for this dimmable LED downlight, multiply your ceiling height by 2.4.
For adequate lighting levels, some overlap is required (as pictured below). We recommend that these LED downlights are installed between 1.5m and 4m apart.
Close spacing of dimmable downlights is helpful for 'task lighting' such as above kitchen benchtops. Downlights in bedrooms and living areas can be installed further apart.
Example Dimmable LED Downlight Beam Angle & Light Spacing.
When replacing existing downlights, it's easiest to stick with the existing lighting layout.
Specifications - Philips Essential SmartBright DN029B G2 Dimmable LED Downlight
|Colour Temperature||Switchable between 3000K (warm white), 4000K (neutral / cool white), or 6500K (cool daylight)|
|Colour Rendering Index (CRI)||87 - measured by Reduction Revolution
80 - Philips' specification
|Dimmable||Yes. Compatible with most AC dimmers.|
|IC Rating||IC4 rated - okay to 'abut and cover' with insulation|
|IP Rating||IP54 front, IP40 back (suitable for damp areas)|
|Dimensions||114mm (width) x 56mm (depth) - suitable for 90-95mm cut out|
|Installation||Comes pre-wired with 80cm flex and 2-pin power plug. Need power sockets in your ceiling? See our 10 Pack.|
|Carton Quantity||12 (this listing is for 1 light)|
|Product Identifiers||Philips DN029B G2 LED8/CCT PSR-E D90 CAU (manufacturer description); 929002531219 (model number); 8719514251779 (barcode).|
|Further Documentation||Spec Sheet (PDF)|
Dimensions of the Philips Dimmable LED Downlight.
Frequently Asked Questions
What dimmers do you recommend for this dimmable downlight?
This Philips LED downlight works with most existing and new dimmer switches. We have tested it on the MEDM (needs a separate on/off switch) and MMDM (integrated on/.off switch) LED dimmers that we sell. It works exceptionally well on both dimmers. Even with only one LED downlight attached these dimmers are able to dim the downlight right down.
Do I have to use a dimmer?
No - the Philips dimmable LED downlight works fine on a regular on/off light switch too!
What other LED downlight options do you sell?
We sell a wide range of other options, including dimmable LED downlight bulbs (MR16, GU10, etc). Click here to view our full range: LED downlights.