Mains Voltage Dimmer Optimised for LED Lighting
The Diginet MEDM LED Dimmer is a dedicated LED dimmer designed to achieve smooth, low range dimming down to just 2W of power.
This is unlike old dimmers which typically only have a minimum load of 20W or 50W and therefore often do not work well in conjunction with energy-saving LED lights.
Key features:
- Fits Australian wall switch plate apertures.
- Minimum load rating of 2W.
- Mechanically adjustable minimum or maximum level.
- An integrated ON LED indicator.
-
Includes filtering to reduce load brightness variation under conditions of line voltage ripple signal injection. Translation: unlike other dimmers it is designed to minimise flicker when off peak hot water is switched on across the electricity grid.
This Diginet LED Dimmer is known to work on a range of dimmable LED lights.
Although optimised for LED lighting loads, this dimmer also provides excellent compatibility with other common lamps types such as incandescent lamps, 12V halogen (dichroic) lamps /transformers and CFL’s.
LED Dimmer - Installation Guide & Wiring Diagram
This product must be installed by a licensed electrician:
- Disconnect power to the circuit at the main switchboard.
- Remove existing switch (and dimmer if present) from wall.
- Connect the new LED dimmer in accordance with the wiring diagrams shown below.
- Refit switch plate to wall and reconnect power.
- Turn switch on and check dimming range by turning rotary dial through the range.
One-way Wiring Diagram
Two-way Wiring Diagram
How to Tune The Diginet LED Dimmer
The Diginet LED dimmer includes a feature which allows the minimum or maximum dimming level to be set. To achieve this, install the dimmer and connect the required lighting loads, as described above. See steps below describing how to set the minimum brightness level:
Specifications - Diginet MEDM LED Dimmer
| Power Range | 2-400W (see data sheet below for details) |
| Voltage | 220-240 V AC |
| Thermal Overload Protection | Yes |
| Short Circuit Protection | Yes |
| Switch Plate Suitability | All leading brands (Clipsal 30M style, see images for an examples) |
| Control | Rotary dial (separate on/off switch required) |
| Dimensions | 22mm (width) x 41mm (depth excluding dial) |
| Weight | 27 grams |
| Installation | Should be installed by an electrician |
| Product Identifiers | Diginet MEDM LEDsmart Adaptive Phase Dimmer (product title); 9346051003630 (barcode). |
| Further Details | Data Sheet (PDF), Installation Guide (PDF) |
Frequently Asked Questions
What other dimmers do you sell?
The Diginet MEDM dimmer on this page is our most popular model. For additional options, including programmable dimmers, see our full AC dimmer range. Looking for even more lighting control? See our smart lights and smart dimmers from Philips Hue.
Does this dimmer fit Clipsal Iconic light switch wall plates?
No, it is not compatible.
Does this LED Dimmer include an on/off switch?
No. This 'MEDM' LED Dimmer requires a separate on/off switch to be used on your wall plate.
We also sell the 'MMDM/RT' model which is an LED dimmer with integrated on/off light switch (ie. you push the dial to switch the light on or off).