Adjustable Black Motion Sensor
The EGLO Detect Me 7 is an adjustable wall-mounted black motion sensor. It uses a passive infrared (PIR) sensor to detect movement and switch electrical loads on and off.
It's commonly used for security lighting around buildings, walkways and driveways. You can pair it with one of our floodlights to illuminate dark areas and only use power when needed. Key features include:
- Outdoor Rated - IP66 waterproof and UV resistant.
- Adjustable - easily adjust time, light level, and movement sensitivity.
-
Broad Compatibility - use it on any load up to 1000 watts.
- Manual Override - disable the sensor from your light switch.
- Dependable - optimal three-wire design and a five-year warranty.
Black Motion Sensor - Installation & Adjustment
You can install this black sensor inside or outside. It detects motion at a distance of up to 18 metres across a 120˚ field of view. The recommended installation height is between 1.8 and 2.5 metres.
Typical installation height and detection range of the black motion sensor.
Once mounted, the sensor can swivel freely on an articulated arm to point wherever it's most needed. It can move side to side by 180° and up and down by 90°. Once positioned, toolless adjusters let you quickly lock in the desired orientation.
The sensor can be adjusted for time of operation, sensor sensitivity, and daylight sensitivity:
- The TIME control is for between 10 seconds and 30 minutes. The timer resets each time motion is detected, so it won't switch on and off if you keep moving within the field of view.
- The SENS setting adjusts how sensitive the sensor is to motion. Adjust this setting if your sensor is triggered too readily (or not often enough).
- The LUX sensor determines whether the light will still come on during the day or only after dark.
All of these settings are user-adjustable on the underside of the unit. So you can still make changes after your electrician has completed the installation.
Specifications - EGLO Black PIR Motion Sensor
| Mounting |
Wall Mounted |
| Power Usage | 0.5W |
| Voltage | 220-240V AC |
| Rated Load | 1000 watts LED or fluorescent 2000 watts halogen |
| Sensor Type | Passive Infrared (PIR) with 3 wire connection |
| Sensor Settings | On Time (10 seconds to 30 minutes), Sensor Sensitivity, and Light Sensor (3 lux to daylight) |
| Sensor Operation | Sensor Active or Manual Override |
| Detection Angle | 120° |
| Detection Distance | Max 18 metres |
| Protection | IP66 outdoor-rated, UV resistant |
| Dimensions | 115mm (height) x 76.4mm (width) x 146mm (depth) Footprint on the wall: 115mm (height) x 73mm (width) |
| Weight | 300 grams |
| Installation | To be completed by an electrician. 3-wire terminal block for electrical connection at the back of the unit (see photos). |
| Product Identifiers | EGLO Detect Me 7 Black, 204527, 9008606210435 |
| Further Details | Spec Sheet (PDF), Installation Guide (PDF) |
| Warranty | 5 Years |
EGLO black sensor dimensions (side view on left, top view on right).
Frequently Asked Questions
Can the sensor be disabled so I can keep my lights on ('manual override')?
Yes - a manual override is built-in. To disable the sensor and keep your lights on, switch the power off and on twice within about three seconds. To enable the sensor again, switch the power off for 10 seconds, then switch it back on.
Looking for another option?
See our white outdoor motion sensor, full range of motion sensor lights and floodlights.