This is a rewireable 240V AC mains power plug with three pins and a 10A current rating.
It's suitable for adding a plug to products that come pre-wired with a lead but no plug, such as some of our LED floodlights and LED battens.
We also sell a 3-Pin plug and lead.
3-Pin 240V 10A Power Plug - Specifications
| Voltage | 220-250V AC |
| Max Current | 10 Amps |
| Max Power | 2,400 Watts |
| Case Material | Plastic |
| Wiring Method | Screw terminals |
| Installation | Electrician |
| Product Identifiers | PowerTech PP-4000 Back Entry Rewireable Plug; 8mm cable back entry; 10A 240VAC |
How to wire a 240V mains power plug
- Slide the cable lock ring and plastic cover onto the cable.
- Strip the wires, as shown below.
- Twist strands and push them into the correct slot from the side.
- Loop the wires under lugs.
- Wire each connection point and tighten the screws.
- Push the plastic cover down until the lip seals firmly around the base.
- Tighten the cable lock screw firmly.
Cable / power plug wiring guide:
- Earth Green/Yellow or Green to E
- Active Brown or Red to A
- Neutral Blue or Black to N