Verbatim T8 LED Tube 9W - 2 Foot (600mm)
Special Offer! Save 10% when you order 10 or more units! Enter discount code TENPACK at checkout.
Easily replace '2 Foot' tubes with LED
The Verbatim LED Tube is a cost-effective replacement for your existing fluorescent lighting.
- Reduces energy consumption by over 50%
- Designed to operate for 30,000 hours
- No electrician required in most cases - install it yourself (see guide below).
Fits all standard T8 light fittings '2 foot' (~60cm) in length. This item replaces regular 18W fluoro tubes with an 9W LED.
Reduce T8 'fluro' tube energy consumption by 60%
Regular T8 fluorescent lamps consume 18 Watts of power with a further ~9 Watts lost in the magnetic ballast. As a result, total power consumption per lamp is actually around 27 Watts.
The Verbatim T8 LED tube, on the other hand, consumes just 9 Watts in total. That's an energy saving of up to 60%.
This translates into an electricity cost saving of about $30 per year, for every tube upgraded. This example assumes 12 hours per day operation and an electricity tariff of $0.25/kWh.
Installation guide - 2 Foot (600mm) LED Fluoro Tube
There are two main types of fluorescent light fittings in existing buildings:
1) Magnetic ballast fittings - with starters. These are the most common fitting type. Simply replace the tube and starter (supplied) and you're done! Magnetic ballast fittings are identifiable by the fact they have starters present.
Easy installation for any fitting with a starter.
2) Electronic ballast fittings - no starters. Unlike the example shown above, these fittings do not have a starter. These units will require an electrician to 'wire out' the existing ballast. Fittings without starters that come on instantly are generally electronic ballast.
A direct replacement with less lumens?
Lumens are a measure of total light output. It is true that the Verbatim LED tube produces less lumens than a modern T8 fluorescent tube.
However, regular T8 tubes release their light in all directions (360˚). Much of this light is lost in the fitting and to unused parts of the room.
The Verbatim LED Tube only directs its light output downward, where it is actually needed. It still spreads light throughout the room, but without losing any light to the fixture or ceiling.
Price includes LED starter
Don't forget to check the packaging for the LED starter. It's easy to miss if you happen to open the package at the other end!
The LED starter is essentially just a safety fuse. It allows the LED tube to work in your existing light fittings, with no further modification.
Secure delivery of LED tubes
We deliver these LED tubes via courier, as they are too large to be delivered with Australia Post.
You are welcome to order any number of tubes, but we generally recommend purchasing at least 2 tubes to ensure safe and secure delivery. The Verbatim LED tubes are packaged into cartons of 10 units, so round numbers of 10 are worth considering where appropriate.
The tubes are well packaged and include plastic covers to prevent the pins from being damaged in transit. Even so, if any damage does occur during transit, just let us know and we'll replace the goods at no cost to you.
Specifications - Verbatim 2 Foot LED Tube
|Fitting Type||T8 tube / G13 connector|
|Power Consumption||9 Watts (replace 18W tube)|
|Voltage||100-240 V AC|
|Colour Temperature||4000K ('cool white') or 6500K ('daylight')|
|Colour Codes||840 or 865|
|Light Output||900 lumen|
|Dimensions||588mm (total length including pins) x 27.5mm (wide)|
|Installation||Self install or consult an electrician.|
|Product Identifiers||65326, 65327 (Order codes);
6943760253269, 6943760253276 (Barcodes)
Spec Sheets - 4000K & 6500K
Frequently Asked Questions
What other options and sizes are available?
If you are upgrading your office lighting we'd recommend that you consider these LED troffer lights designed for t-bar suspended ceilings.
Which is better: 6500K or 4000K?
One colour temperature is not really "better" than the other. Generally 6500K is a "whiter" light and is perceived to be slightly brighter. If you want these LED tubes to look the same as the fluro tubes you are replacing, look for '840' or '865' on your existing tubes. '840' is 4000K and '865' is 6500K.