Philips LED 12V Transformer 15W
- Powers up to 15W of LED - power 1 or 2 LED lights per transformer,
- Push and release (spring loaded) terminals on both input and output,
- Dimmer switch compatible.
Installation / Wiring Diagram
This product should be installed by an electrician. Wiring options shown below.
Dimmer Compatibility List
The Philips ET-S 15 LED Driver is compatible with a wide range of dimmer units, including but not limited to:
- HPM (Legrand) - 400T Trailing edge, 400L Leading edge, CXM03 Leading edge.
Clipsal - 32E450UDM Trailing edge, 32E450TM Trailing edge.
PDL - CAT854M Trailing edge, 654M Trailing edge.
- GIRA - 493 Trailing edge
- KIWI - K004U Leading edge
Generally dimmer performance is 10% to 100% or better. Click here to download a comprehensive performance table for the above list of dimmers.
LED Transformer & Lamp Matching
All of the following Philips LED lamps can be used in conjunction with this transformer with either 1 or 2 lamps connected per transformer:
- Master LED 7W MR16 Dimmable
- Master LED 6.5W MR16
- Master LED 5.5W MR16
- Master LED 4W MR16
- Essential LED 4.2W and 2.6W
Specifications - Philips ET-S 15
|Mains Voltage Range||198-264V AC (50 or 60 Hz)|
|Product Lifetime||40,000 hours|
|Operational Temperature||-20°C ~ +50°C|
|Overheat Protection||Yes (cuts in above 75˚C)|
|Dimensions||115mm x 45mm x 29mm|
|Installation||Should be completed by a licensed electrician|
|Product Identifiers||913710032464 (12NC), 8718291797173 (Barcode)|